M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Pobierz pdf (Strona 34)

There are also two RCA/phono sockets for standard S/PDIF I/O and a pair of IEEE 1394

“FireWire” ports—one to connect to your computer and the other to act as a “thru” port

to another FireWire device such as an external hard drive.

A 1/4-in. jack socket to the left of the FireWire ports, labeled footswitch, is provided for

QuickPunch control—use this to punch in and out while recording.

Finally, the power connector will accept AC supplies between 100 and 240 V running at

either 50 or 60 Hz—so you can connect the Digi 002R to the main electricity supplies in

most countries around the world without problems.

Digidesign Command|8 Control Surface

It can be very useful to have a hardware control surface to use with Pro Tools—

especially if you do not have an audio mixer. The Command|8 is similar to the Digi

002—but without the audio interface features. It is primarily a control surface—although

it does have basic monitoring and routing facilities.

Note

You can use the Command|8 to provide extra faders with a Digi 002, and it can also be

used for remote control of play and record functions with Digidesign’s ProControl and

Control|24 professional control surfaces.

*insert FigAD_11-DigidesignCommand8.tif*

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 70 71

Brak uwag

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Strona 34