M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Pobierz pdf (Strona 33)

To the left of these, a pair of 1/4-in. jacks sockets carries the left and right Monitor

outputs. You connect these to your monitor amplifier and speakers, or directly to

powered monitors, and you can control the level of this output using the dedicated

volume control on the front panel. This monitor output carries whatever signals are being

routed to Main Output pair 1–2.

The main left and right outputs, output pair 1–2, may be connected to a tape or DAT or

CD recorder when recording final mixes to stereo, or it may be used along with the other

three output pairs, 3–4, 5–6, and 7–8, to connect to any other equipment.

The Monitor outputs and the individual outputs are fixed at +4 dBu to suit connection to

professional equipment. Signals routed to output pair 1–2 are also mirrored on a pair of

RCA/phono sockets that provides an alternative −10 dBV output to, say, a cassette or

Mini-disc recorder.

So, in total, the Digi 002R has eight analog input channels and eight analog outputs, and

the A/D and D/A converters offer 24-bit/96-kHz operation—which provides significantly

higher audio quality than the Digi 001 or Mbox, for example.

One MIDI input socket and two MIDI output sockets are provided to support 16 channels

of input and 32 channels of output. To the left of these, there is a pair of optical

connectors that can provide either eight channels of ADAT optical I/O (up to 48 kHz) or

two channels of S/PDIF I/O (up to 96 kHz).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 70 71

Brak uwag

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Strona 33