M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Pobierz pdf (Strona 31)

Hardware options for Pro Tools LE and M-Powered systems

Rear Panel

The 003 and 003 Rack have identical connectors, although the 003’s Power

switch is on its back panel, whereas the 003 Rack’s Power switch is on its front

panel.

Figure A4.17

Digi 003R rear panel.

At the top left of the rear panel can be found four XLR microphone inputs

paired with four balanced 1/4” jacks for line input. The mic preamps have 48V

phantom power enabled on channel pairs.

To the right of the Mic Input 4, there are eight balanced 1/4” jacks

providing eight channels of analogue line level output, followed by two

balanced 1/4” jacks carrying the main L-R studio monitor outputs and a

second pair of balanced 1/4” jacks carrying an alternate pair of control

room monitor outputs. To the right of these can be found a further pair

of balanced 1/4” jacks to provide an Alternate Source input for external

device monitoring. At the far right there is one MIDI In port and two

MIDI Out ports, providing up to 16 channels of MIDI input and up to

32channels of MIDI output.

At the bottom left of the rear panel there are four additional balanced 1/4”

jacks for line input. To the right of these there is a Footswitch jack for starting

and stopping playback or punching in/out while recording; a pair of IEEE-

1394a (FireWire) ports; a pair of optical I/O ports for eight channels of ADAT

optical I/O or two channels of S/PDIF optical I/O; an RCA jack pair providing

alternative access to two channels of S/PDIF digital I/O; and two BNC jacks

providing Word Clock I/O.

Digi 003 Rack+

The 003 Rack+ has eight microphone preampli ers and eight Line/DI inputs.

Each input channel features a 75 Hz HPF, switchable per channel, a –20 dB

pad, switchable per channel, and 48V phantom power on all the mic inputs,

switchable per channel.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 52 53

Brak uwag

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Strona 31