M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Strona 29
- Strona / 53
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Hardware options for Pro Tools LE and M-Powered systems
The first four input channels located on the rear panel each have an XLR
connector for a microphone together with a 1/4” jack for use as a line level
input. Each of these channels has a 75 Hz HPF, switchable per channel, and 48V
phantom power is provided for the mic inputs, switchable in channel pairs.
There is an Alternate Source input for external device monitoring, and two
stereo outputs – a studio monitor output and an alternate control room output.
Line inputs 5–8 have 1/4” TRS jacks switchable between +4 dBu (for pro-level
gear) and –10 dBV (for consumer-level gear). Eight analogue line level outputs
are also provided using 1/4” TRS jacks.
A pair of optical I/O connectors is provided that can be used for eight channels
of ADAT optical I/O or two channels of S/PDIF optical I/O. The two channels of
digital S/PDIF I/O can also be accessed via a pair of phono jack connectors and
separate Word Clock I/O is provided via a pair of BNC connectors.
There is one MIDI In port and two MIDI Out ports, providing up to 16 channels
of MIDI input and up to 32 channels of MIDI output.
The Host Connection to the computer uses two IEEE-1394a (FireWire) ports to
allow exibility when connecting this into a chain of Firewire devices.
NOTE
The FireWire ports on 003 and 003 Rack do not pass data when they are
powered o . If you daisy-chain FireWire devices from your computer, it is
best to connect FireWire hard drives directly to your computer and not to
the 003 family device.
The second FireWire port on 003 or 003 Rack is available for daisy-chaining
FireWire devices such as digital cameras or digital video recorders.
Even when it is powered o , 003 and 003 Rack supply power from the
computer through their FireWire ports, letting you re-charge batteries in
other FireWire devices.
003 Rack
This 2U rackmountable unit provides up to 18 simultaneous channels of audio
I/O at up to 24-bit/96 kHz resolution.
- Hardware options for Pro 1
- Tools LE and M-Powered 1
- systems 1
- Digi 001 2
- Figure A4.3 3
- Digi 001 rear panel 3
- Rear Panel 6
- The Control Surface 8
- Top Section 8
- Home View 9
- Middle Section 9
- Console View Selectors 10
- Channel Scribble Strips 10
- Rotary Encoders 12
- Channel Select 12
- Channel View 12
- NOTE 13
- Dynamics 14
- Inserts 14
- Multi-mono Plug-ins 15
- Lower Section 15
- Faders 16
- Transport Controls 16
- Navigation and Zoom 16
- Function/Utility Keys 17
- Digi 002 Modes 18
- Digi 002 Rack 20
- Front Panel 21
- Rear Panel 21
- Figure A4.11 23
- Digidesign 23
- Digi 003 Family 25
- Control Surface 26
- Standby Mode 27
- Pro Tools Mode 27
- MIDI Mode 28
- Utility Mode 28
- 003 Rack 29
- Digi 003 Rack+ 31
- The Mbox 33
- The Back Panel 34
- Zero-latency Monitoring 35
- Summary 37
- Mbox 2 38
- Mbox 2 Pro 40
- Mbox 2 Micro 42
- Figure A4.28 43
- Mbox 2 Micro 43
- Firewire Audiophile 47
- FireWire Solo 48
- Figure A4.37 49
- Audiophile 192 high 49
- I/O and MIDI 49
- Delta 1010 50
- Delta 1010 LT 51
- Delta 44 51
- Delta 66 52
- Latest Additions 53
Powiązane produkty i podręczniki dla Networking M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic
(79 strony)
(36 strony)Digi Urządzenia sieci komórkowej podręczniki użytkownika
Zaczynanie od 0-9
Komentarze do niniejszej Instrukcji