M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Pobierz pdf (Strona 23)

Hardware options for Pro Tools LE and M-Powered systems

A 1/4” jack socket to the left of the FireWire ports, labeled Footswitch, is

provided for QuickPunch control – use this to punch in and out while recording.

Finally, the power connector will accept AC supplies between 100 and 240 volts

running at either 50 or 60 Hz – so you can connect the Digi 002R to the main

electricity supplies in most countries around the world without problems.

Digidesign Command|8 Control Surface

It can be very useful to have a hardware control surface to use with Pro Tools–

especially if you do not have an audio mixer. The Command|8 is similar to the

Digi 002 – but without the audio interface features. It is primarily a control

surface – although it does have basic monitoring and routing facilities.

NOTE

You can use the Command|8 to provide extra faders with a Digi 002, and

it can also be used for remote control of play and record functions with

Digidesign’s ProControl and Control|24 professional control surfaces.

Figure A4.11

Digidesign

command|8 control

surface with 002R

interface and laptop.

Designed speci cally for use with Pro Tools, the Command|8 Control Surface

has a big, bright 110-character backlit LCD display that is at least twice as nice

as the Digi 002’s display and connects to your computer using a standard USB

cable. It has eight sets of touch-sensitive moving faders and rotary encoders

that you can easily shift in banks to control all of the tracks in your Pro Tools

session.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 52 53

Brak uwag

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Instrukcja Użytkownika Strona 23